Cosa fa
WL-ICNAP48F-060 è un punto di accesso wireless a soffitto ad alta potenza da 300 Mbps con chipset Atheros QCA9531. Conforme allo standard IEEE 802.11b / g / n, velocità dati 300 Mbps, con antenna MIMO omni all’interno, alta potenza RF 500mW insieme a PoE IEEE 802.3af, facile da installare in diversi ambienti.
Custodia per montaggio a soffitto, hardware con chipset Atheros, 16M Flash, 128M DDR2, funzionamento firmware con controller AC per gestione centralizzata e funzione di autenticazione del portale captive, progettata specificamente per ambienti di classe business come hotel, aeroporti, caffetterie, centri commerciali, sportivi sedi e campus universitario.
Design elegante per montaggio a soffitto
Ospitato in un’elegante custodia montabile a soffitto, il WL-ICNAP48F-060 può essere installato su una parete o sul soffitto per integrarsi perfettamente con la maggior parte delle decorazioni interne in un hotel moderno. Con ampio spazio e installato a soffitto, estende il segnale wireless ottimale a più stanze vicine e una migliore radiazione termica.
Alta potenza e copertura totale
Con 500 mW di potenza elevata, dotato internamente di antenne omnidirezionali 2X2 a più ingressi e uscite multiple (MIMO) 5dBi migliorano la portata e massimizzano la velocità dei dati. Testato sul campo per coprire senza fili 6 ~ 8 camere d’albergo a una distanza operativa interna di 50 metri e consentire accessi simultanei fino a 32 utenti. La velocità wireless fino a 300 Mbps garantisce a più utenti un livello di servizio adeguato.
Power over Ethernet
Il dispositivo ha integrato Power over Ethernet (PoE) per una facile installazione e costi inferiori, con IEEE 802.3af PoE, può essere installato in aree in cui le prese di corrente non sono prontamente disponibili, eliminando il caos di alterare l’infrastruttura di rete esistente.
Supporto per controller WLAN e server cloud
Questo WL-ICNAP48F-060 funziona con il sistema di controllo accessi, accede facilmente alle impostazioni di rete avanzate tramite PC, come il monitoraggio dello stato AP, cambia indirizzo IP, ESSID, canale, password, aggiorna il firmware, backup e ripristino …
Inoltre, questo punto di accesso wireless funziona con Cloud Server, gestione remota semplice, pubblicità, autenticazione del portale captive, persino fatturazione e raggio supportati nel prossimo futuro, che rendono questo AP più professionale nei progetti WiFi.
Hardware | Hardware |
MCU | Atheros QCA9531 |
RF | 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11b/g/n standard |
Memory | 128MB DDR RAM |
Flash | 16MB |
Interface | 2 x RJ-45 for 10/100 Mbps WAN/LAN Port (WAN port support IEEE 802.3af POE) |
1 x Reset button(Reset & Factory Defaults) | |
1 x Power DC Jack | |
Power | DC 12V/1A; POE IEEE802.3af 48VPoE,110V/220V |
Antenna | Build in 2PCS Omni 5dbi antenna |
Size | 18.9 x 3.85cm |
RF | RF |
Frequency | 802.11b/g/n, 533MHz – 2.4~2.4835GHz |
U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations | |
Modulation | Modulation |
OFDM | BPSK,QPSK, 16-QAM, 64-QAM |
DSSS | DBPSK, DQPSK, CCK |
Throughput | 300 Mbps |
Sensitivity | Sensitivity |
802.11n(2.4GHz) | -90dBm @ MCS0 |
-70dBm @ MCS7 | |
-90dBm @ MCS8 | |
-68dBm @ MCS15 | |
802.11g | – 90dBm @ 6Mbps |
– 72dBm @ 54Mbps | |
802.11b | – 95dBm @ 1Mbps |
– 90dBm @ 11Mbps | |
Output Power | Output Power |
802.11n(2.4GHz)(± 1.5dBm) | 25dBm@ MCS0~2/MCS8~10 |
25dBm @ MCS3/MCS11 | |
24dBm @ MCS4/MCS12 | |
24dBm @ MCS5/MCS13 | |
24dBm @ MCS6/MCS14 | |
23dBm @ MCS7/MCS15 | |
Radio1(WLAN1) | 802.11g(± 1.5dBm) |
25dBm @ 6~24Mbps | |
24dBm @ 36Mbps | |
24dBm @ 48Mbps | |
24dBm @ 54Mbps | |
802.11b(±1.5dBm) | 26dBm @1~11Mbps |
Software | Software |
Operation Mode | Gateway/ AP/ Repeater |
Protocol/Standard | IEEE 802.3(Ethernet) |
IEEE 802.3u(Fast Ethernet) | |
IEEE 802.11b/g/n(2.4G WLAN) | |
Wireless | Auto-Channel selection |
Distance Control (802.1x Ack timeout) | |
BSSID | |
Security | WEP Encryption-64/128/152 bit |
WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | |
WPA/WPA2 Enterprise (WPA-EAP using TKIP) | |
Hide SSID | |
Management | Management |
System Settings | Web-based configuration (HTTP/Telnet) |
Firmware Upgrade | Upgrade firmware via web browser or TFTP Admin Password can be configured |
Administration | Admin Password can be configured |
System monitoring | Status in hand , useful statistic and Event log |
Logs | Supports local logs, logs host, logs file export |
Reset | Reset or factory defaults |
Backup | Restore settings & configuration of the device to local file |
Physical Property | Physical Property |
Working Temperature | 0°C~55°C |
Storage Temperature | -20°C to 70°C |
Humidity | 5%~95% (typical) |
Package | Package |
1 | WL-ICNAP48F-060 complete set |
1 | User Manual |
1 | 90mm LAN Cable |
1 | Setting Accessory |